home
Product Catalog
GSM/GPRS/3G wireless module
GSM/GPRS modem terminal
GPS module
module develop board
Gsm active antenna
GPS active antenna
Coaxial connecting,Module connector
BGA chip
Other communication device
RF connector
SIMCOM GSM/GPRS Module
Quectel GPS/GNSS Module
Quectel GSM/GPRS Module
Quectel LTE Module
 Quectel UMTS&HSDPA Module
News
Contact Us
Service Terms and Conditions

Product Catalog 

 

Molex Vehicle Rear view Mirror DVR GPS Navigator Receiver Module

  • Molex Vehicle Rear view Mirror DVR GPS Navigator Receiver Module
  • Molex Vehicle Rear view Mirror DVR GPS Navigator Receiver Module
  • Molex Vehicle Rear view Mirror DVR GPS Navigator Receiver Module
Model No.︰HR-45R-20MXB
Brand Name︰SZHR
Country of Origin︰China
Unit Price︰US $ 10 / pc
Minimum Order︰5 pc
Share on:

 Total 10 Related Items 
12345Next

Product Description

GPS mouse GPS receiver with Molex connector

HR-45R-20MXB

General Description

 

The HR-45R-20MXB module series is a family of stand alone GPS receivers featuring the high performance u-blox 7 positioning engine. These flexible and cost effective receivers offer numerous connectivity options in a miniature 45x38x13mm package.Their compact architecture and power and memory options make HR-45R-20MXB modules ideal for battery operated mobile devices with very strict cost and space constraints.

The 56-channel u-blox M8 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicated acquisition engine,with over 1 million correlators is capable of massive parallel time/frequency space searches,enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources and mitigates multi path effects, giving HR-45R-20MXB GPS receivers excellent navigation performance even in the most challenging environments.

 

Applications

  • UVA(unmanned aerial vehicle)
  • DVR(Digital Video Recording)
  • Rear view mirror DVR
  • Car Tracker

Main chip

UBLOX-G7020-KT

Track sensitivity

-165dBm

Time to First Fix

Extremely fast at low signal level

Built in high LNA

YES

Power consumption

Max 25mA@3.3V

Protocol

NMEA-0183 compliant protocol or custom protocol

Operating temperature

-40 to 85℃

Operating voltage

3.0V to 5.0V

Module type

UART/TTL

Size

45x38x13mm

Certification

RoHS compliant(Lead-free)

1 Description

1.1. Key Features

Parameter

Specification

Power Supply

  • Supply voltage:  3.0V~5.0V  Typical: 3.3V

Power Consumption

  • Acquisition:  25mA @VCC=VBAT=3.3V
  • Tracking:  20mA @VCC=VBAT=3.3V
  • Backup:  15uA @VBAT=3.3V

Receiver Type

  • Code 56 search channels ,22 synchronous tracking channels
  • GPS&QZSS L1 1575.42MHz C/A ,GLONASS L1OF 1602MHz, 

    SBAS: WAAS, EGNOS, MSAS, GAGAN

Sensitivity

  • Tracking:   -165dBm
  • Re-acquisition:   -156dBm
  • Acquisition:   -146dBm

TTFF (Autonomous)

  • Cold start:   35s  typ @-130dBm
  • Warm start:   30s  typ @-130dBm
  • Hot start:   1s   typ @-130dBm

Horizontal Position

Accuracy (Autonomous)

  • <2.5m CEP @-130 dBm

Max Update Rate

  • Up to 10Hz, 1Hz by fault

Accuracy of 1PPS Signal

  • not enabled

Acceleration Accuracy

  • Without aid: 0.1m/s²

Dynamic Performance

  • Maximum altitude:  18,000m
  • Maximum velocity:  515m/s
  • Acceleration:  4G

UART Port

  • UART Port:  TXD and RXD
  • Supports baud rate from 4800bps to 115200bps, 9600bps by default
  • UART port for NMEA and UBX output, binary or ublox proper Agreement input

Temperature Range

  • Normal operation:  -40°C ~ +85°C
  • Storage temperature:  -45°C ~ +125°C

Physical Characteristics

  • Size: 45±0.20 × 38±0.20 ×13±0.50mm
  • Connecting line specifications: Molex 2*2Pin , L=150cm
  • Weight: Approx.20g

 

1.2 Power Supply

Regulated power for the HR-45R-20MXB is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 3.0V~5.0V, Recommended power supply voltage is 3.3V . maximum current is 25mA. Suitable decoupling must be provided by external decoupling circuitry.

 

1.3 UART Ports

   The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and ublox proprietary commands input.

2 Application

   The Gmouse is equipped with a Molex 2*2 Pin connects to your application platform.

   The HR-45R-20MXB Gmouse It consists of a ublox UBX-G7020-KT single chip GPS IC which includes the RF part and Baseband part, a patch antenna, a LNA, a SAW filter, a TCXO, a crystal oscillator, Also comes with a 0.22F crystal capacitor ,can backup satellite ephemeris about 2 hour.

 

2.1. Pin Assignment

 CON Pin Description

 

 

Pin name

I/O

Description

Remark

1

RXD

I

UART Serial Data Input

 

2

VCC

I

Module Power Supply

Voltage range: 3.0V~5.0V

3

TXD

O

UART Serial Data output

 

4

GND

G

Ground

 

 

Payment Terms︰TT; WU ;LC;PAYPAL
Product Image




Related Products
GPS antenna with sma connector
GPS antenna with sma connector
US $ 2.3
GPS antenna with SMA/ BNC/ MCX/ MMCX connector
GPS antenna with SMA/ BNC/ MCX/ MMCX connector
GPS antenna with MMCX connector
GPS antenna with MMCX connector
GPS antenna with MCX connector
GPS antenna with MCX connector

home  |  Product Catalog  |  SIMCOM GSM/GPRS Module  |  Quectel GPS/GNSS Module  |  Quectel GSM/GPRS Module  |  Quectel LTE Module  |  Quectel UMTS&HSDPA Module  |  News  |  Contact Us  |  Service Terms and Conditions  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap